Gutter Installation & Replacement in Star, ID
Star homes benefit from seamless gutters sized to local roof loads and rainfall patterns. Star has grown quickly with custom and semi-custom homes along the Boise River. Larger roofs and detached structures (shops, RV barns) benefit from oversized 6-inch gutters and dedicated downspout routing. We form gutters on-site to your home's exact dimensions, eliminating the seam leaks that come with sectional systems.
Free on-site estimate · No-pressure quote · Same crew start to finish
QUICK ANSWER
Seamless aluminum gutter installation in the Treasure Valley typically runs $10–$22 per linear foot, $14 typical. We form 5- or 6-inch K-style or half-round profiles on-site, hang on screwed hidden hangers, and water-test every run before we leave.
- 5″ & 6″ K-Style
- Half-Round
- Aluminum
- Color-Matched
- Hidden Hangers
LOCAL CONTEXT
Why Star homes need gutter installation.
Star sits along the Boise River with significant pollen, cottonwood seed, and leaf load. Custom homes here have larger roof footprints than typical, so gutter sizing matters more than in production-home neighborhoods.
In Star, this typically means homes in River Birch and Meadow Lakes, the right gutter profile depends on roof area, pitch, and local weather load. We size every system on-site — not from a default spec sheet.
- Custom homes with 3,000+ square feet of roof routinely overflow 5-inch gutters during summer thunderstorms — 6-inch K-style or half-round is the right answer.
OUR APPROACH
How we handle gutter installation in Star.
Free measurement and design walkthrough
We measure every roof run, identify downspout placement based on roof load and ground drainage, and confirm gutter profile (5-inch K, 6-inch K, half-round). We review color samples against your fascia and trim on-site.
Old gutter removal and disposal
We remove the existing gutter system, check fascia for rot or pulled fasteners, and haul away the old material. Any soft fascia is flagged before we hang new gutters — we don't hang new gutters on bad fascia.
Hidden hanger placement
Hidden hangers are screwed into rafter tails or solid fascia at proper spacing (typically every 24 inches). We use screws — not nails — so the gutter holds under snow load and over time.
On-site seamless forming
Our seamless gutter machine sits on the truck and forms the entire length of each run from a single coil of aluminum. No joints to leak. End caps and miters are sealed with butyl sealant — not silicone, which fails in cold weather.
WHAT’S INCLUDED
Gutter Installation in Star — what we cover.
- On-site seamless gutter forming (no leak-prone seams)
- 5-inch and 6-inch K-style, plus half-round options
- Hidden hangers screwed into rafter or fascia — not nails
- Downspouts sized and routed for actual roof load
- Color matched to fascia, trim, or roof
- Old gutters removed and hauled away
Want a quick range for gutter installation in Star? Gutter installation is priced per linear foot, with adjustments for downspouts, profile (5" vs. 6" vs. half-round), and access (single vs. multi-story, complex rooflines). Our cost calculator gives a ranged per-foot estimate; the on-site visit produces a written quote with all components itemized.
Open the calculator →COST RANGE
How much does gutter installation cost in Star?
Gutter Installation in Star typically runs $10–$22 per linear foot — about $14 on average before downspouts. The biggest variables are total footage, story count and access, gutter profile, and existing condition.
PER LINEAR FOOT
Typical $14 per linear foot
Downspouts are an add-on at $40–$90 each (typical $65), sized to the roof area they drain.
Estimated total by home size
| Home size | Est. linear ft | Estimated total |
|---|---|---|
| Small / Cottage (single-story) | 100–140 ft | $1,075–$3,275 (typ. $1,800) |
| Mid-size (single-story) | 140–185 ft | $1,500–$4,350 (typ. $2,475) |
| Large (single-story) | 185–230 ft | $2,000–$5,425 (typ. $3,175) |
| Smaller two-story | 150–200 ft | $1,650–$4,775 (typ. $2,700) |
| Mid-size two-story | 200–260 ft | $2,150–$6,100 (typ. $3,475) |
| Large / Custom (two-story+) | 260–360 ft | $2,825–$8,475 (typ. $4,725) |
These are Treasure Valley ranges only — the on-site visit gives the real number. Actual cost depends on roof access, story count, existing condition, and the system selected.
WHY US
Why Star homeowners choose us.
Eliminate overflow, fascia rot, and basement seepage
Match modern home styles or restore older homes
Protect landscaping and foundation
One-day install on most single-story homes
SERVING STAR
Neighborhoods we serve in Star.
If your address isn’t listed, call (208) 247-2660 — we likely still cover it.
More Services
Other services in Star
Gutter Guard Installation
Stop cleaning gutters for good.
Gutter Guards in Star →Gutter Repair
Fix leaks, sags, and pulled-away sections.
Gutter Repair in Star →Gutter Cleaning
Hand-cleaned gutters, flushed downspouts.
Gutter Cleaning in Star →Seamless Gutter Installation
Formed on-site. No joints to leak.
Seamless Gutters in Star →Copper Gutter Installation
50-year gutters that get better looking over time.
Copper Gutters in Star →Half-Round Gutter Installation
The correct profile for craftsman and historic homes.
Half-Round Gutters in Star →Ice Dam Prevention
Stop the freeze-thaw cycle before it reaches your ceiling.
Ice Dam Prevention in Star →Fascia & Soffit Repair
Rebuild the board your gutters bolt to.
Fascia & Soffit in Star →Downspouts & Drainage
Get roof water away from the foundation.
Downspouts in Star →Frequently asked questions
How much does gutter installation cost in the Treasure Valley?
How long does gutter replacement take?
Do you do 5-inch or 6-inch gutters?
Can you add gutter guards during installation?
What colors are available?
What's the difference between seamless and sectional gutters?
Do you handle gutter installation on new construction?
Nearby
Same service nearby
Ready for Gutter Installation in Star?
Call (208) 247-2660 or get a free estimate. Licensed Idaho contractor serving Star and the Treasure Valley.